Phrozen Resin Aqua 8K

Phrozen Resin Aqua 8K is one of the most accurate materials from Phrozen. The resin is specifically formulated to showcase super-fine detail in full 8K resolutions. Works best with Phrozen's 8K 3D Printers. 

• high precision - super-fine detail in full 8K resolution
• low shrinkage - low warpage and dimensional stability
• low viscosity and low odor - easy to print and post-process due to very low viscosity. Almost no smell during the printing process
• available in Color Gray, Snow Gray, Red Clay, and Vanilla
• wide application - the printed parts are tough and resilient. Can be used for printing models but also for industrial parts.

Technical Specification

• Volume: 1kg / 5kg
• Viscosity: 280-380 cps
• Density: 1.1 g/cm3
• Surface Hardness: 82 Shore D
• UTS: 43 MPa
• Tensile modulus: 1730 MPa
• EAB: 8%
• Izod notched impact strength: 10 J/m
• HDT @0.45MPa: 77 ℃

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us