Deal!Flashforge Guider 3 Ultra

Flashforge Guider 3 Ultra is a high-speed FFF 3D printer for professional applications. Because of the extraordinary speed (500mm/s), you can easily increase production efficiency. Flashforge Guider 3 Ultra comes with a dual-extruder structure, high surface quality, and finer details. Because of more stable operation, open material system, and increased speed, the new 3D printer from Flashforge can be used in many industrial areas for product development verification, igs  & fixtures parts, finished parts, teaching aids, and architecture. 

• extraordinary printing speed - up to 500mm/s. Ultrafast  and ultrastable 2-5 times higher speed, up to 400% productivity increase
• dual-extruder structure unleashing designs - 3-second tool-free disassembly of the hot end, offering easier maintenance and replacement, the highest extruder temperature of 350℃
  
• large build volume - 330mm x 330mm(300mm when dual extruder) x 600mm
• high surface quality and finer details - dual Z-axis ball screws ensure accurate positioning of printing each layer. 
• stable printing 24/7
• power loss recovery system - it can save the printing state in the event of an unexpected power failure and continue printing after the power is restored
• wide range of materials -  the 350℃ high-temperature extruder is compatible with ABS / PLA / PC / PA / HIPS / ASA / PETG / PA-CF, etc., supports 3rd-party materials, suitable for various applications
• environmentally friendly - low-consumption, and safe working environment

Technical Specification

• Printing Technology: FFF
• Print Resolution: 0.15 mm
• Printer Size: 635*550*1070 mm
• Build Volume: 330*330*600mm (single extruder) 300*330*600mm (dual extruders)
• Print Speed: max. 500mm/s
• Number of Extruders: 2
• Diameter of Extruder: 0.4mm (0.4/0.6/0.8mm)
• Max Set Temp. of Extruder: 350°C
• Max Set Temp. of Platform: 120°C
• Support Filament: PLA/ ABS/ ASA/ PC/ PA/ ASA/ PETG / PA-CF/ PA-GF/ PLA-CF/ PETG-CF/ PETG-GF
• Touch Screen: 7’’ 
• Slicing Software: Slic3r/ Cura (Need to set up)
• Printing Connection: USB Flash Drive/ Ethernet/ Wi-Fi
• Input File: 3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG files
• Output File: GX/ G File/ Gcode
• Working Environment: 15-30°C

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us