Contact us!eSUN Filament PLA+ – 1.75mm

eSUN Filament PLA + is an environment-friendly material, which is easy to print and has a smooth surface. PLA+ filament has good strength, rigidity, toughness balance, and strong impact resistance. So PLA + is considered suitable for functional parts printing. eSUN PLA+ is approved by FDA and is safer to use. PLA+ can be used for modeling and rapid prototyping.

• good toughness
• strong impact resistance
• high-speed printing
• smooth printed surface
• available in 3 colors - cold white, black and grey
• easy to print - no warping, no cracking, good printing stability
• hard to break - bend repeatedly and no cracking
• for most FFF/FDM  3D Printers

Technical Specification

• Package size: 1 kg 
• Density: 1.23 g/cm3
• Heat Distortion Temp (℃,0.45MPa): 53
• Tensile Strength: 63 MPa
• Flexural Strength: 74 MPa
• EAB: 20%
• Flexural Modulus: 1973 MPa
• Impact Strength: 9 kJ/㎡
• Extruder Temp: 210 – 230℃
• Bed Temp: 45 – 60°C
• Printing Speed:  40 – 100mm/s
• Heated Bed:  Optional

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us